TA761 Ultra High Flow Relief Valve - Industrial Spare Part RFQ
Brand: AGM Container Controls
Part Number / SKU: TA761
Product Family: Pressure Control > Breather Valves > Ultra High Flow Relief Valves
This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement.
Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.
Product Information
TA761 Ultra High Flow Relief Valve SKU: TA761 TA761 Ultra High Flow Relief Valve Categories Breather Valves , Pressure Control , Ultra High Flow Relief Valves Description Similar to AGM's TA796 valve, the TA761 is a high-flow magnet valve that achieves higher flow rates than are available in a comparably sized spring-actuated valve. The TA761 has full flow instantly, making it the ideal solution for rapid decompression applications. This high flow also means that fewer valves are required per container when compared to comparably sized spring-actuated valves. AGM's TA761 magnet breather valves have a predictable, repeatable opening pressures, and a high flow can be achieved regardless of the opening pressure, as compared to spring-actuated valves. Download Magnet Valve White Paper The chart below shows the typical flow performance for the TA761 valve. The dashed lines show varying cracking (opening) points. The dotted line shows the performance of a spring-actuated valve of the same size, for comparison purposes. As shown in the chart above, various cracking pressures are available for the TA761 valve. The reseal pressure of the valve, however, is not selectable due to the valve's high volume of air flow. In many cases, the valve will completely equalize the pressure inside an enclosure with its surrounding atmosphere before the valve closes. Materials Housing, Cover, Washer & Nut - Aluminum Alloy • Cover Screws - Stainless Steel Materials (Cont.) Float & Magnet Support - Glass Filled Polycarbonate • Magnets - Nickel Plated Neodymium Iron Boron Materials (Cont.) Return Spring - Phosphor Bronze • Gasket and Internal Seal - Silicone Finish Anodize Mounting Hole Diameter 2.050 ± .04 (50.8 ± 1 mm) Maximum Wall Thickness 0.75 (19 mm) Installation Torque 80-90 in. - lbs. Weight 0.331 lbs. (150 grams) Cracking Ranges Available (psid) 0.1 - 1.0 Housing has hook spanner notches. TA761 Drawing Additional Information Materials Housing, Cover, Washer & Nut-Aluminum Alloy, Cover Screws-Stainless Steel, Float & Magnet Support-Glass Filled Polycarbonate, Magnets-Nickel Plated Neodymium Iron Boron, Return Spring-Phosphor Bronze, Gasket & Internal Seal-Silicone Finish Anodize Mounting Hole Diameter 2.050 ± .04 (50.8 ± 1 mm) Maximum Wall Thickness 0.75 in. (19 mm) Installation Torque 80-90 in. – lbs. Weight 0.331 lbs. (150 grams) Cracking Ranges Available 0.1-1.0 psid Operating Temperature -80°F to +160°F (-62°C to +71°C) Tech Sheets Drawing TA761-P Step File
Technical Details
Materials | Housing, Cover, Washer & Nut - Aluminum Alloy • Cover Screws - Stainless Steel
Materials (Cont.) | Float & Magnet Support - Glass Filled Polycarbonate • Magnets - Nickel Plated Neodymium Iron Boron
Materials (Cont.) | Return Spring - Phosphor Bronze • Gasket and Internal Seal - Silicone
Finish | Anodize
Mounting Hole Diameter | 2.050 ± .04 (50.8 ± 1 mm)
Maximum Wall Thickness | 0.75 (19 mm)
Installation Torque | 80-90 in. - lbs.
Weight | 0.331 lbs. (150 grams)
Cracking Ranges Available (psid) | 0.1 - 1.0
Materials | Housing, Cover, Washer & Nut-Aluminum Alloy, Cover Screws-Stainless Steel, Float & Magnet Support-Glass Filled Polycarbonate, Magnets-Nickel Plated Neodymium Iron Boron, Return Spring-Phosphor Bronze, Gasket & Internal Seal-Silicone
Maximum Wall Thickness | 0.75 in. (19 mm)
Installation Torque | 80-90 in. – lbs.
Cracking Ranges Available | 0.1-1.0 psid
Operating Temperature | -80°F to +160°F (-62°C to +71°C)
Additional Information
Technical Documents
Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.
RFQ Notes
- Original brand and part number should be confirmed during quotation.
- Availability, lead time, and shipping options are confirmed after RFQ review.
- For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.
