TA261-1 Electronic Humidity Indicator

TA261-1 Electronic Humidity Indicator - Industrial Spare Part RFQ

Brand: AGM Container Controls

Part Number / SKU: TA261-1

Product Family: Humidity Monitoring > Humidity Indicator Plugs and Sensors

This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement. Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.

Product Information

TA261-1 Electronic Humidity Indicator SKU: TA261-1 TA261-1 Electronic Humidity Indicator Categories Humidity Indicator Plugs and Sensors , Humidity Monitoring Description This anodized aluminum Humidity Indicator Plug has an electronic display. Pressing the button initiates the following display sequence, showing each measurement for 1-3 seconds: Relative Humidity: 5 to 80%RH Temperature: -20 to 60°C Dewpoint: -30 to 20°C The flat lithium coin cell battery has an estimated life of 5 years. The central core can be removed to provide battery replacement access. The assembly has IP67 ingress protection and can be stored between -40 and 80°C. The external o-ring is EPDM, and the internal seal is Nitrile. Other material information available upon request. Also available: RFI Protection Weight: 0.3 lbs Mounting Requirements: Mounting hole diameter: 1.435 ±.015 (38.5 ±0.4 mm) Thread size: M36x1.5 − 6g Recommended installation torque: 40-50 in-lbs (4.5-5.6 N·m) Maximum wall thicknesses: .35 in (8.9 mm) Minimum wall thickness: 0 Contact AGM's Engineering department for more information. Additional Information Internal O-Ring Material External: EPDM & Internal: Nitrile Maximum Wall Thickness 0.35 in (8.9 mm) Mounting Hole Diameter 1.435 in (36.5 mm) External Gasket Material Nitrile Body Finish Anodized, Black Weight 0.3 lbs (136 grams) Maximum Internal Pressure 5 psi Body Material Aluminum Recommended Installation Torque 40-50 in-lbs (4.5-5.6 N·m) Tech Sheets TA261-1 Step File

Technical Details

Internal O-Ring Material | External: EPDM & Internal: Nitrile
Maximum Wall Thickness | 0.35 in (8.9 mm)
Mounting Hole Diameter | 1.435 in (36.5 mm)
External Gasket Material | Nitrile
Body Finish | Anodized, Black
Weight | 0.3 lbs (136 grams)
Maximum Internal Pressure | 5 psi
Body Material | Aluminum
Recommended Installation Torque | 40-50 in-lbs (4.5-5.6 N·m)
Additional Information

Technical Documents

Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.

RFQ Notes

• Original brand and part number should be confirmed during quotation.
• Availability, lead time, and shipping options are confirmed after RFQ review.
• For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.