Manual Relief Valve TA316

Manual Relief Valve TA316 - Industrial Spare Part RFQ

Brand: AGM Container Controls

Part Number / SKU: TA316

Product Family: Pressure Control > Breather Valves > Manual Relief Valves

This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement. Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.

Product Information

Manual Relief Valve TA316 SKU: TA316 Manual Relief Valve TA316 Categories Breather Valves , Manual Relief Valves , Pressure Control Description A "push-to-open" Manual Relief Valve that is similar in construction to and mounts in the same hole as the TA327 Breather Valve . Side venting design permits pressure equalization even when the button is depressed by personnel wearing arctic gloves. May open automatically at vacuum pressures above 6.0 psid. Can be mounted through a 0.51 in. (13 mm) diameter hole. Part No. TA317, without hex nut, installs in a 0.500-20 UNF-2B threaded boss. Materials Housing - Aluminum Finish Housing - Anodize Mounting Requirements Nut & O-Ring, provided with each valve Mounting Hole Diameter 0.51 ± 0.01 (13 ± 0.25 mm) Installation Torque 30-40 in. - lbs. (3.4-4.5 N•m) Maximum Wall Thickness 0.14 (3 mm) Weight 0.046 lb. (21 grams) Add washer for wall thickness less than 0.03 (1 mm). (P/N MS15795-855, order separately.) For threaded boss installation: 0.500-20 UNF-2B; 0.51 ± 0.01 (13 ± 0.25 mm) diameter X 0.02 (1 mm) minimum deep counterbore required for thread relief. Part No. TA317 comes without hex nut. The TA316 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information. Additional Information Materials Housing-Aluminum Alloy Finish Housing-Anodize Mounting Requirements O-Ring & Hex Nut are provided with each valve Mounting Hole Diameter 0.51 ± 0.01 (13 ± 0.25 mm) Maximum Wall Thickness 0.14 in. (3 mm) Installation Torque 30-40 in. – lbs. (3.4-4.5 N-m) Weight 0.046 lbs. (21 grams)

Technical Details

Materials | Housing - Aluminum
Finish | Housing - Anodize
Mounting Requirements | Nut & O-Ring, provided with each valve
Mounting Hole Diameter | 0.51 ± 0.01 (13 ± 0.25 mm)
Installation Torque | 30-40 in. - lbs. (3.4-4.5 N•m)
Maximum Wall Thickness | 0.14 (3 mm)
Weight | 0.046 lb. (21 grams)
Materials | Housing-Aluminum Alloy
Finish | Housing-Anodize
Mounting Requirements | O-Ring & Hex Nut are provided with each valve
Maximum Wall Thickness | 0.14 in. (3 mm)
Installation Torque | 30-40 in. – lbs. (3.4-4.5 N-m)
Weight | 0.046 lbs. (21 grams)
Additional Information

RFQ Notes

• Original brand and part number should be confirmed during quotation.
• Availability, lead time, and shipping options are confirmed after RFQ review.
• For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.