Breather Valve TA225 - Industrial Spare Part RFQ
Brand: AGM Container Controls
Part Number / SKU: TA225
Product Family: Pressure Control > Breather Valves > Two-Way Relief Valves
This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement.
Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.
Product Information
Breather Valve TA225 SKU: TA225 Breather Valve TA225 Categories Breather Valves , Pressure Control , Two-Way Relief Valves Description The TA225 is AGM's smallest aluminum Breather Valve. It is suitable for use on transit cases and other applications up to 2.5 cubic feet in volume. It has separate and distinct settings for both pressure and vacuum relief. Standard reseal settings range from 0.5 psid to 3.0 psid. The TA225 requires no field maintenance. Corrosion-resistant materials are used throughout. The spherical valve seat is Teflon coated to allow for easy "break-away" action of the internal silicone rubber seal. The TA225 Breather Valve is offered with or without a manual release button and provides superior protection from sand and dust intrusion. The TA225 can be mounted to a thru hole or threaded boss. Each valve comes complete with an environmental O-ring. An optional mounting flange and/or desiccant cartridge (up to 3" in length with choice of desiccant media) are available upon request. RFI/EMI shielded versions are also available. Materials Housing, Hex Nut & Washer - Aluminum Alloy, Gasket - Silicone per A-A-59588, Class II Grade 40 Finish Clear anodize Mounting Requirements Gasket, washer & hex nut, provided with each valve Mounting Hole Diameter 0.53 ± 0.02 in. (14 ± 0.38 mm) Maximum Wall Thickness 0.33 in.(8.4 mm)* Installation Torque 20 in. - lbs. (2-3 N-m) Weight 0.02 lbs. (8 grams) *For threaded boss installation: 1/2-20 UNF-2B Contact AGM's Engineering Department for information on NEMA and IP ratings. Part Number: The part number consists of "TA225" followed by the pressure setting dash number, the vacuum setting dash number, and the letter "R" if a manual release button is required. PRESSURE SIDE (FLOW OUT) VACUUM SIDE (FLOW IN) Dash No. Sealed @ Flow Rate @ Pressure Dash No. Sealed @ Flow Rate @ Pressure -05 0.5 psid* 0.32 scfm† @ 2.0 psid* -05 0.5 psid* 0.56 scfm† @ 2.0 psid* *To convert to metric equivalent (millibars) multiply by 69 †To convert metric equivalent (liters/sec) multiply by 0.472 TA225 Drawing TA225-R Drawing Additional Information Weight 0.02 lbs Materials Housing, Hex Nut & Washer-Aluminum Alloy, Gasket-Silicone per A-A-59588, Class II Grade 40 Finish Clear Anodize Mounting Requirements Gasket, Washer, Hex Nut are provided with each valve Mounting Hole Diameter 0.53 ± 0.02 in (14 ± 0.38 mm) Maximum Wall Thickness 0.33 in (8.4 mm) Installation Torque 20 in. – lbs (2-3 N-m) Tech Sheets Drawing - TA225 Drawing - TA225-R TA225 Step File TA225-R Step File
Technical Details
Materials | Housing, Hex Nut & Washer - Aluminum Alloy, Gasket - Silicone per A-A-59588, Class II Grade 40
Finish | Clear anodize
Mounting Requirements | Gasket, washer & hex nut, provided with each valve
Mounting Hole Diameter | 0.53 ± 0.02 in. (14 ± 0.38 mm)
Maximum Wall Thickness | 0.33 in.(8.4 mm)*
Installation Torque | 20 in. - lbs. (2-3 N-m)
Weight | 0.02 lbs. (8 grams)
PRESSURE SIDE (FLOW OUT) | VACUUM SIDE (FLOW IN)
Dash No. | Sealed @ | Flow Rate @ Pressure | Dash No. | Sealed @ | Flow Rate @ Pressure
-05 | 0.5 psid* | 0.32 scfm† @ 2.0 psid* | -05 | 0.5 psid* | 0.56 scfm† @ 2.0 psid*
Weight | 0.02 lbs
Materials | Housing, Hex Nut & Washer-Aluminum Alloy, Gasket-Silicone per A-A-59588, Class II Grade 40
Finish | Clear Anodize
Mounting Requirements | Gasket, Washer, Hex Nut are provided with each valve
Mounting Hole Diameter | 0.53 ± 0.02 in (14 ± 0.38 mm)
Maximum Wall Thickness | 0.33 in (8.4 mm)
Installation Torque | 20 in. – lbs (2-3 N-m)
Additional Information
Technical Documents
Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.
RFQ Notes
- Original brand and part number should be confirmed during quotation.
- Availability, lead time, and shipping options are confirmed after RFQ review.
- For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.
