Breather Valve TA240-R

Breather Valve TA240-R - Industrial Spare Part RFQ

Brand: AGM Container Controls

Part Number / SKU: TA240-R

Product Family: Pressure Control > Breather Valves > Two-Way Relief Valves

This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement. Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.

Product Information

Breather Valve TA240-R SKU: TA240-R Breather Valve TA240-R Categories Breather Valves , MIL-Spec Valves , One-Way Relief Valves , Pressure Control , Two-Way Relief Valves Description Meets MIL-DTL-27166 & SAE AS27166 The TA240-R is a hybrid of the TA333-R Breather Valve and TA238 Breather Valve . It combines the mounting thread size and hex shape of AGM's TA333-R Breather Valve with the screened cover and lower cost of AGM's TA238 Breather Valve. The valve can be used on transit cases and similar applications up to 33 cubic feet in volume. It has a flow rate of 1.5 to 4.0 SCFM at 1.5 psid above the reseal setting and is available in settings from 0.5 psid to 5.0 psid. The valve is lightweight, rugged, tamper-proof and requires no field maintenance. Corrosion-resistant materials are used throughout. The valve seal is made of silicone rubber. A recessed manual release push button is standard on all TA240-R Breather Valves. It is used to equalize residual pressure or vacuum differentials in order to open the container. Gasket, washer and hex nut are provided with each valve. As indicated below, the lower the setting, the higher the flow rate. Mounting Flanges and RFI/EMI shielding are available for this valve. For additional enclosure protection, AGM can develop a custom desiccant cartridge that mates with the valve. The TA240 Breather Valve will not provide protection against water intrusion from a high-pressure hose down. Use a TA330 , TA333 or TA770 Breather Valve for applications where this is required. Materials Housing, Hex Nut & Washer - Aluminum Alloy, Gasket - Silicone Rubber per ZZ-R-765 Finish Housing - Black anodize, Washer & Nut - Clear anodize * Mounting Requirements Gasket, washer & hex nut, provided with each valve Mounting Hole Diameter 1.05 ± 0.015 (27 ± 0.38 mm) Maximum Wall Thickness 0.61 (15 mm) * Installation Torque 30-40 in. - lbs. (3.4-4.5 N•m) Weight 0.02 lbs. (32 grams) *Add extra washer for wall thickness less than .04 (1 mm). (AGM P/N 300013-16, order separately.) For threaded boss installation: 3/4-14 NPSM; 1.05 ± 0.015 (27 ± 0.38 mm) X 0.08 (2 mm) minimum deep counterbore required for thread relief. Contact AGM's Engineering department for information on NEMA and IP ratings. TA240-R Drawing Two-Way Pressure and Vacuum Relief Valves PRESSURE SIDE (FLOW OUT) VACUUM SIDE (FLOW IN) Dash No. Sealed @ Flow Rate @ Pressure Dash No. Sealed @ Flow Rate @ Pressure -05 0.5 psid* 3.0 SCFM† @ 2.0 psid* -05 0.5 psid* 4.0 SCFM† @ 2.0 psid* -10 1.0 psid* 2.5 SCFM† @ 2.5 psid* -10 1.0 psid* 3.0 SCFM† @ 2.5 psid* -15 1.5 psid* 2.5 SCFM† @ 3.0 psid* -15 1.5 psid* 3.0 SCFM† @ 3.0 psid* -20 2.0 psid* 2.5 SCFM† @ 3.5 psid* -20 2.0 psid* 2.5 SCFM† @ 3.5 psid* -25 2.5 psid* 1.5 SCFM† @ 4.0 psid* -25 2.5 psid* 1.5 SCFM† @ 4.0 psid* *To convert to metric equivalent (millibars) multiply by 69 †To convert metric equivalent (liters/sec) multiply by 0.472 Dash numbers for the Pressure and Vacuum sides may be used in any combination (i.e. TA240-05-15-R). AGM can also supply TA240-R Valves with other settings than those shown above. Please contact AGM for availability. Before making drawings of these valves, contact AGM for part numbers to be used. One-Way Pressure or Vacuum Relief Valves While typically configured as a two-way valve, this valve can also be configured for one-way flow. For example, part number TA240-P-30 is the one-way pressure relief version of part number TA240-30-30-R, while part number TA240-VR-30 is the one-way vacuum r

Technical Details

Materials | Housing, Hex Nut & Washer - Aluminum Alloy, Gasket - Silicone Rubber per ZZ-R-765
Finish | Housing - Black anodize, Washer & Nut - Clear anodize *
Mounting Requirements | Gasket, washer & hex nut, provided with each valve
Mounting Hole Diameter | 1.05 ± 0.015 (27 ± 0.38 mm)
Maximum Wall Thickness | 0.61 (15 mm) *
Installation Torque | 30-40 in. - lbs. (3.4-4.5 N•m)
Weight | 0.02 lbs. (32 grams)
PRESSURE SIDE (FLOW OUT) | VACUUM SIDE (FLOW IN)
Dash No. | Sealed @ | Flow Rate @ Pressure | Dash No. | Sealed @ | Flow Rate @ Pressure
-05 | 0.5 psid* | 3.0 SCFM† @ 2.0 psid* | -05 | 0.5 psid* | 4.0 SCFM† @ 2.0 psid*
-10 | 1.0 psid* | 2.5 SCFM† @ 2.5 psid* | -10 | 1.0 psid* | 3.0 SCFM† @ 2.5 psid*
-15 | 1.5 psid* | 2.5 SCFM† @ 3.0 psid* | -15 | 1.5 psid* | 3.0 SCFM† @ 3.0 psid*
-20 | 2.0 psid* | 2.5 SCFM† @ 3.5 psid* | -20 | 2.0 psid* | 2.5 SCFM† @ 3.5 psid*
-25 | 2.5 psid* | 1.5 SCFM† @ 4.0 psid* | -25 | 2.5 psid* | 1.5 SCFM† @ 4.0 psid*
Dash No. | Cracking Pressure * | Reseal Pressure * | Flow Rate * | Dash No. | Cracking Pressure * | Reseal Pressure * | Flow Rate *
-P-025 | 0.25-0.75 psid | 0.25 psid | 4.0 SCFM† @ 1.75 psid | -VR-025 | 0.25-0.75 psid | 0.25 psid | 4.0 SCFM† @ 1.75 psid
-P-05 | 0.50-1.00 psid | 0.5 psid | 3.0 SCFM† @ 2.0 psid | -VR-05 | 0.50-1.00 psid | 0.5 psid | 4.0 SCFM† @ 2.0 psid
-P-10 | 1.00-1.70 psid | 1.0 psid | 2.5 SCFM† @ 2.5 psid | -VR-10 | 1.00-1.70 psid | 1.0 psid | 3.0 SCFM† @ 2.5 psid
-P-15 | 1.50-2.25 psid | 1.5 psid | 2.5 SCFM† @ 3.0 psid | -VR-15 | 1.50-2.25 psid | 1.5 psid | 3.0 SCFM† @ 3.0 psid
-P-20 | 2.00-3.00 psid | 2.0 psid | 2.5 SCFM† @ 3.5 psid | -VR-20 | 2.00-3.00 psid | 2.0 psid | 2.5 SCFM† @ 3.5 psid
-P-25 | 2.50-3.50 psid | 2.5 psid | 1.5 SCFM† @ 4.0 psid | -VR-25 | 2.50-3.50 psid | 2.5 psid | 1.5 SCFM† @ 4.0 psid
-P-30 | 3.00-4.00 psid | 3.0 psid | 1.5 SCFM† @ 4.5 psid | -VR-30 | 3.00-4.00 psid | 3.0 psid | 1.5 SCFM† @ 4.5 psid
Materials | Housing, Hex Nut & Washer-Aluminum Alloy, Gasket-Silicone Rubber per ZZ-R-765
Finish | Housing-Black Anodize, Washer & Nut-Clear Anodize
Mounting Requirements | Gasket, Washer, Hex Nut are provided with each valve
Maximum Wall Thickness | 0.61 in (15 mm)
Installation Torque | 30-40 in. – lbs (3.4-4.5 N-m)
Weight | 0.02 lbs (32 grams)
Complies With | MIL-DTL-27166, SAE AS27166
Additional Information

Technical Documents

Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.

RFQ Notes

• Original brand and part number should be confirmed during quotation.
• Availability, lead time, and shipping options are confirmed after RFQ review.
• For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.