Breather Valve TA294-R - Industrial Spare Part RFQ
Brand: AGM Container Controls
Part Number / SKU: TA294-R
Product Family: Pressure Control > Breather Valves > Two-Way Relief Valves
This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement.
Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.
Product Information
Breather Valve TA294-R SKU: TA294-R Breather Valve TA294-R Categories Breather Valves , Pressure Control , Two-Way Relief Valves Description The TA294-R Breather Valve was designed to meet the need for a low cost, two-way valve for use on transit cases and similar applications up to 8 cubic feet in volume. It is similar to TA292-R Breather Valves , except it is longer and has a flow rate of 1.0 SCFM at a pressure of 1.5 psi to 2.0 psi above the valve setting. Standard settings range from 0.5 psid to 3.0 psid reseal pressure. The valve is tamper-proof and requires no field maintenance. Corrosion-resistant materials are used throughout. The valve seal is made of silicone rubber. Each valve comes complete with a nut, washer and gasket. A manual release push button is standard on all TA294-R valves. It is used to equalize pressure or vacuum differentials in order to open the container. Materials Housing, Hex Nut & Washer - Aluminum Alloy, Gasket - AMS-R-6855, Class II, Grade 60 Finish Alodine with anodized hex nut Mounting Requirements Gasket, washer & hex nut, provided with each valve Mounting Hole Diameter 0.78 ± 0.015 (20 ± 0.4 mm) Maximum Wall Thickness 0.10 (3 mm) Installation Torque 25-35 in. - lbs. (3.0-4.0 N•m) Weight 0.02 lbs. (32 grams) For threaded boss installation: 0.750-16 UNF-2B; no counterbore requirement Contact AGM's Engineering department for information on NEMA and IP ratings. PRESSURE SIDE (FLOW OUT) VACUUM SIDE (FLOW IN) Dash No. Sealed @ Flow Rate Dash No. Sealed @ Flow Rate -05 0.5 psid* 1.0 SCFM† @ 2.0 psid* -05 0.5 psid* 1.0 SCFM† @ 2.0 psid* -10 1.0 psid* 1.0 SCFM† @ 2.5 psid* -10 1.0 psid* 1.0 SCFM† @ 2.5 psid* -15 1.5 psid* 1.0 SCFM† @ 3.0 psid* -15 1.5 psid* 1.0 SCFM† @ 3.0 psid* -20 2.0 psid* 1.0 SCFM† @ 3.5 psid* -20 2.0 psid* 1.0 SCFM† @ 3.5 psid* -25 2.5 psid* 1.0 SCFM† @ 4.5 psid* -25 2.5 psid* 1.0 SCFM† @ 4.5 psid* -30 3.0 psid* 1.0 SCFM† @ 5.0 psid* -30 3.0 psid* 1.0 SCFM† @ 5.0 psid* *To convert to metric equivalent (millibars) multiply by 69 †To convert metric equivalent (liters/sec) multiply by 0.472 Dash numbers for the Pressure and Vacuum sides may be used in any combination (i.e. TA294-05-15-R). Before making drawings of these valves, contact AGM for part numbers to be used. Additional Information Materials Housing & Hex Nut-Aluminum Alloy, Gasket-AMS-R-6855, Class II, Grade 50 Finish Alodine with anodized hex nut Mounting Requirements Gasket, Washer, Hex Nut are provided with each valve Mounting Hole Diameter 0.78 ± 0.015 (20 ± 0.4 mm) Maximum Wall Thickness 0.10 in. (3 mm) Installation Torque 25-35 in. – lbs. (3.0-4.0 N-m) Weight 0.02 lbs. (8.4 grams) Tech Sheets TA294 Step File
Technical Details
Materials | Housing, Hex Nut & Washer - Aluminum Alloy, Gasket - AMS-R-6855, Class II, Grade 60
Finish | Alodine with anodized hex nut
Mounting Requirements | Gasket, washer & hex nut, provided with each valve
Mounting Hole Diameter | 0.78 ± 0.015 (20 ± 0.4 mm)
Maximum Wall Thickness | 0.10 (3 mm)
Installation Torque | 25-35 in. - lbs. (3.0-4.0 N•m)
Weight | 0.02 lbs. (32 grams)
PRESSURE SIDE (FLOW OUT) | VACUUM SIDE (FLOW IN)
Dash No. | Sealed @ | Flow Rate | Dash No. | Sealed @ | Flow Rate
-05 | 0.5 psid* | 1.0 SCFM† @ 2.0 psid* | -05 | 0.5 psid* | 1.0 SCFM† @ 2.0 psid*
-10 | 1.0 psid* | 1.0 SCFM† @ 2.5 psid* | -10 | 1.0 psid* | 1.0 SCFM† @ 2.5 psid*
-15 | 1.5 psid* | 1.0 SCFM† @ 3.0 psid* | -15 | 1.5 psid* | 1.0 SCFM† @ 3.0 psid*
-20 | 2.0 psid* | 1.0 SCFM† @ 3.5 psid* | -20 | 2.0 psid* | 1.0 SCFM† @ 3.5 psid*
-25 | 2.5 psid* | 1.0 SCFM† @ 4.5 psid* | -25 | 2.5 psid* | 1.0 SCFM† @ 4.5 psid*
-30 | 3.0 psid* | 1.0 SCFM† @ 5.0 psid* | -30 | 3.0 psid* | 1.0 SCFM† @ 5.0 psid*
Materials | Housing & Hex Nut-Aluminum Alloy, Gasket-AMS-R-6855, Class II, Grade 50
Mounting Requirements | Gasket, Washer, Hex Nut are provided with each valve
Maximum Wall Thickness | 0.10 in. (3 mm)
Installation Torque | 25-35 in. – lbs. (3.0-4.0 N-m)
Weight | 0.02 lbs. (8.4 grams)
Additional Information
Technical Documents
Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.
RFQ Notes
- Original brand and part number should be confirmed during quotation.
- Availability, lead time, and shipping options are confirmed after RFQ review.
- For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.
