Manual Relief Valve TA321

Manual Relief Valve TA321 - Industrial Spare Part RFQ

Brand: AGM Container Controls

Part Number / SKU: TA321

Product Family: Pressure Control > Breather Valves > Manual Relief Valves

This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement. Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.

Product Information

Manual Relief Valve TA321 SKU: TA321 Manual Relief Valve TA321 Categories Breather Valves , Manual Relief Valves , Pressure Control Description This minimum profile Manual Relief Valve has a captive knurled twist knob for hand operation. The valve is black anodized and can be used in thin wall containers. It mounts through a 0.50 in. (13 mm) diameter hole. Meets MS18014-1. Materials Housing - Aluminum Finish Housing - Anodize Mounting Requirements Nut & gasket, provided with each valve Mounting Hole Diameter 0.50 ± 0.015 (12.7 ± 0.38 mm) Installation Torque 15-20 in. - lbs. (1.7-2.3 N•m) Maximum Wall Thickness 0.08 (2 mm) Weight 0.013 lb. (6 grams) Add washer for wall thickness less than 0.02 (0.5 mm). (P/N MS15795-855, order separately.) For threaded boss installation: 0.468-32 UNS-2B; 0.50 ± 0.015 (12.7 ± 0.38 mm) diameter X 0.02 (0.5 mm) minimum deep counterbore required for thread relief. The TA321 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information. Additional Information Materials Housing-Aluminum Alloy Finish Housing-Anodize Mounting Requirements Hex Nut & Gasket are provided with each valve Mounting Hole Diameter 0.50 ± 0.015 (12.7 ± 0.38 mm) Maximum Wall Thickness 0.08 in. (2 mm) Installation Torque 15-20 in. – lbs. (1.7-2.3 N•m) Weight 0.013 lbs. (6 grams) Tech Sheets TA321 Step File

Technical Details

Materials | Housing - Aluminum
Finish | Housing - Anodize
Mounting Requirements | Nut & gasket, provided with each valve
Mounting Hole Diameter | 0.50 ± 0.015 (12.7 ± 0.38 mm)
Installation Torque | 15-20 in. - lbs. (1.7-2.3 N•m)
Maximum Wall Thickness | 0.08 (2 mm)
Weight | 0.013 lb. (6 grams)
Materials | Housing-Aluminum Alloy
Finish | Housing-Anodize
Mounting Requirements | Hex Nut & Gasket are provided with each valve
Maximum Wall Thickness | 0.08 in. (2 mm)
Installation Torque | 15-20 in. – lbs. (1.7-2.3 N•m)
Weight | 0.013 lbs. (6 grams)
Additional Information

Technical Documents

Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.

RFQ Notes

• Original brand and part number should be confirmed during quotation.
• Availability, lead time, and shipping options are confirmed after RFQ review.
• For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.