TA762 Ultra High Flow Relief Valve - Industrial Spare Part RFQ
Brand: AGM Container Controls
Part Number / SKU: TA762
Product Family: Pressure Control > Breather Valves > Ultra High Flow Relief Valves
This AGM Container Controls item is listed on AltraParts for industrial sourcing and RFQ-based procurement.
Send your required quantity, delivery country, target lead time, and any technical requirements for quotation review.
Product Information
TA762 Ultra High Flow Relief Valve SKU: TA762 TA762 Ultra High Flow Relief Valve Categories Breather Valves , Pressure Control , Ultra High Flow Relief Valves Description The TA762 high-flow vacuum relief valve is designed to offer the maximum air flow possible for a 2.5-inch diameter valve. It achieves this flow with its unique design that utilizes powerful rare earth magnets instead of the compression springs found on a conventional breather valve. The magnets allow the valve to open quickly and completely once the initial opening resistance is overcome. The TA762 can be used in any application where rapid, high volume, air intake is required. Each valve is shipped with a factory-set opening pressure, requires no field maintenance, and is supplied complete with a nut, washer, and gasket. Additionally, the TA762 may be configured with a manual release button, which is used to equalize vacuum differentials in order to make opening the container easier. The chart below shows the typical flow performance for the TA762 valve. The dashed lines show varying cracking (opening) points. The 4.5-inch diameter TA798 valve is also available if higher flow rates are required. As shown in the chart above, various cracking pressures are available for the TA762 valve. The reseal pressure of the valve, however, is not selectable due to the valve's high volume of air flow. In many cases, the valve will completely equalize the pressure inside an enclosure with its surrounding atmosphere before the valve closes. Materials Housing, Cover, Washer & Nut - Aluminum Alloy • Cover Screws - Stainless Steel Materials (Cont.) Float & Magnet Support - Glass Filled Polycarbonate • Magnets - Nickel Plated Neodymium Iron Boron Materials (Cont.) Return Spring - Phosphor Bronze • Gasket and Internal Seal - Silicone Finish Anodize Mounting Hole Diameter 2.550 ± .04 (65 ± 1 mm) Maximum Wall Thickness 0.60 (15 mm) Installation Torque 80-90 in. - lbs. Weight TA762-V - 0.727 lbs. (330 grams) • TA762-VR - 0.772 lbs. (350 grams) TA762-VR Only: Manual Release Button Anodized Aluminum Alloy Lockout Pin & Lockout Pin Retaining Cable: Stainless Steel Housing and nut have hook spanner notches. Use a 3-inch hook spanner wrench for the nut and a 3.25-inch hook spanner wrench for the housing. Available in cracking ranges 0.1 - 1.0 psi. TA762-V Drawing TA762-VR Drawing Additional Information Materials Housing, Cover, Washer & Nut-Aluminum Alloy, Cover Screws-Stainless Steel, Float & Magnet Support-Glass Filled Polycarbonate, Magnets-Nickel Plated Neodymium Iron Boron, Return Spring-Phosphor Bronze, Gasket & Internal Seal-Silicone Finish Anodize Mounting Hole Diameter 2.550 ± .04 (65 ± 1 mm) Maximum Wall Thickness 0.60 in. (15 mm) Installation Torque 80-90 in. – lbs. Weight TA760V-0.727 lbs. (330 grams), TA762-VR-0.772 lbs. (350 grams) Operating Temperature -80°F to +160°F (-62°C to +71°C) Tech Sheets Drawing - TA762-V TA762-V Step File Drawing - TA762-VR TA761-VR Step File
Technical Details
Materials | Housing, Cover, Washer & Nut - Aluminum Alloy • Cover Screws - Stainless Steel
Materials (Cont.) | Float & Magnet Support - Glass Filled Polycarbonate • Magnets - Nickel Plated Neodymium Iron Boron
Materials (Cont.) | Return Spring - Phosphor Bronze • Gasket and Internal Seal - Silicone
Finish | Anodize
Mounting Hole Diameter | 2.550 ± .04 (65 ± 1 mm)
Maximum Wall Thickness | 0.60 (15 mm)
Installation Torque | 80-90 in. - lbs.
Weight | TA762-V - 0.727 lbs. (330 grams) • TA762-VR - 0.772 lbs. (350 grams)
Manual Release Button | Anodized Aluminum Alloy
Lockout Pin & Lockout Pin Retaining Cable: | Stainless Steel
Materials | Housing, Cover, Washer & Nut-Aluminum Alloy, Cover Screws-Stainless Steel, Float & Magnet Support-Glass Filled Polycarbonate, Magnets-Nickel Plated Neodymium Iron Boron, Return Spring-Phosphor Bronze, Gasket & Internal Seal-Silicone
Maximum Wall Thickness | 0.60 in. (15 mm)
Installation Torque | 80-90 in. – lbs.
Weight | TA760V-0.727 lbs. (330 grams), TA762-VR-0.772 lbs. (350 grams)
Operating Temperature | -80°F to +160°F (-62°C to +71°C)
Additional Information
Technical Documents
Technical drawing, STEP file, datasheet or product document links were detected from the source page. Please verify the latest revision before ordering.
RFQ Notes
- Original brand and part number should be confirmed during quotation.
- Availability, lead time, and shipping options are confirmed after RFQ review.
- For replacement or equivalent sourcing, include photos, nameplate data, and existing part references.
